- Land Rover Range
- Brand
- Aftermarket Products (24)
- Bosch (59)
- Brembo (18)
- Britpart (19)
- Ebc (26)
- Ebc Brakes (21)
- Febi Bilstein (25)
- First Line (22)
- Fls (62)
- Land Rover (497)
- Land Rover Genuine (14)
- Landrover (16)
- Lr Trade Parts Uk (28)
- Nrf (16)
- Oe Quality (26)
- Powerful Uk Ltd (32)
- Range Rover (24)
- Terrafirma (16)
- Textar (18)
- Yuasa (19)
- Other (2420)
- Category
- Metal Type
- Type
- Brake Disc (12)
- Brake Disc Rotor (50)
- Brakes (32)
- Braking (8)
- Bumper (15)
- Complete Caliper (10)
- Control Arm (13)
- Cooling And Heating (11)
- Grill / Vent (12)
- Grille (9)
- Interior (9)
- Light Bar (8)
- Lights (7)
- Rear Light Assembly (10)
- Running Board (13)
- Side Steps (43)
- Track Control Arm (10)
- Transmission (12)
- Turbocharger (10)
- Wheel Set (158)
- Other (2950)
- Version
- Warranty
Fits Land Rover Range Evoque Discovery Sport Velar Defender Nox Sensor AMS
Interchange part numbers: FPLA-5H310-CB, 02C2D57277, FPLA-5H310-CC, 2T4A2625.. All of our parts are high quality aftermarket parts unless otherwise stated.
All parts meet or exceed specifications required for sale in the UK and Europe. Stock is held and dispatched from our warehouse in the UK. Diesel: 2.0 SD4, 2.0 TD4, 3.0 D, 3.0 TD, 3.0 TD6. Diesel: 2.0, 2.0 D, 2.1 D.Diesel: 3.0 D, 3.0 TDV6, 4.4 D. Diesel: 3.0 D, 4.4 D. Land Rover Range Rover Evoque. Diesel: 2.0 D, 2.1 D. Land Rover Range Rover Sport.
Diesel: 2.0 SD4, 3.0 D. Land Rover Range Rover Velar. Diesel: 2.0 D, 2.0 TD4, 3.0 D. Diesel: 3.0, 3.0 D, 3.0 TDV6, 4.4 D.
FPLA-5H310-CB, 02C2D57277, FPLA-5H310-CC, 2T4A2625, 02T4A2625, LR114277, LR071752, LR146853, FPLA5H310CB. Notes: Complete kit including connectors, heat shrink tubes and installation guide.
If your original Nox sensor is showing a fault, it is usually because the original probe is at the end of its life or has burnt out. In most cases the control box is still working. A replacement probe should clear any diagnostic error codes and dashboard error lights relating to a faulty NOX Sensor.Because the original control box is being re-used. There will be no requirement for re-programming the unit after fitting. The only way to be 100% sure that the part will fit your vehicle is to check the part number on your original unit matches one of the above. Consequential loss and labour claims are not accepted. Fast Dispatch On All Orders.